Customizing Packages in HP SPP ISO and Offline Firmware Update in ProLiant Servers. (HP SUM – Smart Update Manager) is customized. Will help you next time. Smart Update Manager (SUM) operates without the need for agents or other permanently installed software on the target nodes. Baseline functionality including validation, assigning baselines in guided update, dynamic filtering, filtering by server model and the ability to download baselines from http server. HP provides free data and system fileprotection for its business desktops, notebooks, and workstations. HP Softpaq Download Manager » HP System Software Manager. Downloading or Updating Software and Drivers for HP Computers. To find the name of a component, search for and open Device Manager, find the component, and then expand. For example, updates to 3.1.2. Updates are usually free. The HP software and driver download pages provide only updates, not upgrades. A software upgrade. Procedure for applying patches. Download and install hpsum, you can use instructions posted at the bottom of this page to setup repository for this purpose.
* RECOMMENDED * HP Smart Update Manager
By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
Type:
Application - System Management
Version:
7.6.0(24 Oct 2016)
Operating System(s):
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows HPC Server 2008 R2
Multi-part download
File name:
hpsum760.zip (116 MB)
File name:
contents.txt (172 KB)
HP Smart Update Manager is a product which updates firmware and software on HPE Synergy Compute Modules, HPE ProLiant servers, and firmware on HPE Integrity and HPE ProLiant Moonshot servers. HP SUM has a browser-based GUI; as well as a scriptable interface using legacy command line interface, inputfile, and interactive command line interface modes. For more information, please see the Enterprise Information Library, http://www.hpe.com/info/sum-docs.
Enhancements for HP SUM 7.6.0:
Added support for new HPE Synergy Gen9 Compute Modules, HPE ProLiant Gen9 servers, and options
Added support for Microsoft Windows Server 2016
Baseline - Improved the custom baseline smart component filtering
Prerequisites:
For prerequisite information, please see the HP SUM Release Notes.
To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:
Reboot Requirement: Reboot may be required after installation for updates to take effect and hardware stability to be maintained.
End User License Agreements: HPE Software License Agreement v1 BSD License gSOAP Software End User License Agreement Libcurl End User License Agreement The MIT License Agreement OpenSSL License Agreement zlib End User License Agreement Hewlett-Packard End User License Agreement
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Important:
Note: To migrate node information from HP SUM 6.x to HP SUM 7.6.0, please run hpsum_migration.bat (Windows) or hpsum_migration.sh (Linux) found in the same directory as HP SUM. See the HP SUM Release Notes for more information. Note: To migrate node information from HP SUM 5.x to HP SUM 7.6.0, please run port-targets.bat (Windows) or port-targets.sh (Linux) found in the same directory as HP SUM. See the HP SUM Release Notes for more information. For more information on HP SUM, please see the Enterprise Information Library.
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Note: To migrate node information from HP SUM 6.x to HP SUM 7.6.0, please run hpsum_migration.bat (Windows) or hpsum_migration.sh (Linux) found in the same directory as HP SUM. See the HP SUM Release Notes for more information. Note: To migrate node information from HP SUM 5.x to HP SUM 7.6.0, please run port-targets.bat (Windows) or port-targets.sh (Linux) found in the same directory as HP SUM. See the HP SUM Release Notes for more information. For more information on HP SUM, please see the Enterprise Information Library.
Version:8.4.5 (9 Sep 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Please see the SUM Release Notes for fixes addressed in this release.
Version:8.4.0 (2 Apr 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Please see the SUM Release Notes for fixes addressed in this release.
• Support for scheduling via iLO Repository. • Support for rollback and update of recovery sets. • Support for installing the necessary pre-requisites prior to inventory. • Handling dependencies for Mellanox components. • Provide detailed errors upon inventory and deploy failures. • Improved component dependency checking when doing updates via iLO Repository • Support online updates of HDDs behind Mesa Verde & NVMe controllers • Enhance the mechanism of handling reboot required flag in software RPM • Support for SLES 15 OS • Improved handling of SUM user sessions • Provide granular install status to SUM users via detailed XML • Prevent installation of post-production SPP on production servers.
Version:8.3.7 (28 Nov 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Added support for Microsoft Windows Server 2019 for HPE Gen10 servers
Version:8.3.6 (5 Nov 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Please note that this release of SUM is for OneView 4.10 and later addressing the following issues:
SUM self-update issue with multiple existing baselines resulting in component details not getting updated during baseline processing.
NVMe drive firmware version comparison failure.
This version of SUM is released for use in creating Custom Baseline bootable ISO files for use with OneView 4.10 and later.
Version:8.3.5 (9 Oct 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Please see the SUM Release Notes for fixes addressed in this release.
Support for Online updates of Gen10 ESXi nodes.
Version:8.3.1 (26 Jun 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Addressed increased DB size issue that is observed on adding multiple baselines.
Fixed an issue of not copying 'Saas_Required_Files.txt' file when a Custom Baseline is created using 'Save Baseline' option.
Addressed a OneView hang issue.
Addressed file tag missing issue in Custom Baseline meta xml file.
Version:8.3.0 (26 Jun 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Please refer to the SUM Release Notes for information on the issues addressed in this release.
Version:8.2.0 (5 Feb 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Security Enhancements:
Improved security key management for encrypting and decrypting node credentials.
Better session token management.
Enabled SUM with FIPS compliant Open SSL libraries which enables SUM to update systems where FIPS is enabled on OS.
Custom Baseline Enhancements:
Reduce the size of SPP ISO by selecting only the latest component version.
Display only the list of server model filters on Custom baseline UI that is supported by SPP.
Enable staging the applicable components to iLO Repository. Customer can now update systems in two steps.
Upload the components before the maintenance window and
Perform the actual deploy during the maintenance window.
Enable updating firmware on NVDIMM devices.
Support for updating software components on Gen 9 ESXi.
Better handling dependency between IE and ME
Version:8.1.0 (22 Dec 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Support for iLO High Security Mode
Version:8.0.0 (12 Jul 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Version:7.6.2 (15 Sep 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
HPSUM now properly detects which one of CISS2 and CISS3 driver is installed and show up only the applicable one.
Added support for Firmware RPM debranded components
Added support for component configuration in case of debranded components
Version:7.6.0 (24 Oct 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.6.0:
Added support for new HPE Synergy Gen9 Compute Modules, HPE ProLiant Gen9 servers, and options
Added support for Microsoft Windows Server 2016
Baseline - Improved the custom baseline smart component filtering
Version:7.5.1 (1 Apr 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.5.1:
Added support for new HP ProLiant Gen9 servers and options
Added support for HP 512MB Flash Backed Write Cache for B-Series Smart Array
Added support for Red Hat Enterprise Linux 7.2, SUSE Linux Enterprise Server 12.1
Updated logo and copyright to Hewlett Packard Enterprise
Improved Trusted Module (TM) and Trusted Platform Module (TPM) support
Baseline - Improved the custom baseline smart component filtering
Version:7.4.0 (1 Oct 2015)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Added support for new HP ProLiant Gen9 servers and options
Node Deployment
Node Deployment user interface has been modified to have Easy and Advanced modes as well as a component dashboard. With both modes, HP SUM will still present the components that can be installed on the node. Easy mode allows you to deploy the HP SUM recommended components in a single step. Advanced mode allows you to individually select which components to deploy.
Node deployment can now scale to 50 nodes.
Baseline
Download baseline from hp.com now requires an entitlement token in order to download entitled components delivered with the HP Service Pack for ProLiant.
Support for Red Hat Enterprise Linux 6.7, SUSE Linux Enterprise Server 11.4, VMware vSphere 6.0 U1
Version:7.3.1 (25 Sep 2015)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Version:7.3.0 (3 Aug 2015)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.3.0:
Added support for new HP ProLiant Gen9 servers and options
Added deployment support for VMware firmware components that have been converted from scexe to zip format
Added support when HP SUM is running on a supported Linux operating system to accept SSH keys as passwords
Custom Baseline - Added ability to specify an explicit version of HP SUM to be included in the baseline
Version:7.2.0 (30 Mar 2015)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.2.0:
Baseline
New interface for component configuration including the ability to import and export the component configuration data (Available in GUI, CLI, and interactive CLI modes)
Added modifications to Custom Baseline to generate baselines which can be used by HP Version Control Repository Manager (VCRM)
Deployment
Modified the node deployment-related screens to remove the Analysis button
Node Groups
Removed the default Node Group
Reports
Specify the location where reports are stored (Available in GUI, CLI, and interactive CLI modes)
New Hardware and Operating System Support
Support for new HP ProLiant Gen9 servers and options
Support for Red Hat Enterprise Linux 7.1, Red Hat Enterprise Linux 6.6, SUSE Linux Enterprise Server 12, VMware vSphere 5.1 U3, and VMware vSphere 2015
Version:7.1.0 (9 Sep 2014)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.1.0:
Scalable Updates powered by iLO Federation
Added the ability to automatically discover the iLO Federation Groups on the management network using multicast technology as well as adding them manually
Added the ability to update online the iLO and ROM firmware on HP ProLiant servers in the iLO Federation Group via the iLO
Added the ability to update all applicable firmware on HP ProLiant servers in the iLO Federation Group via the iLO using offline firmware deployment
Deployment of VMware VIBs and Linux firmware RPMs
Deployment
Enhanced deployment experience by viewing deployment logs during the deployment process (AKA Live logs)
Enhanced hard disk drive firmware deployment for selective HDD update (limited to firmware packages that supports this)
Added warning when deploying to nodes with HP Service Guard for HP-UX or Linux
HP Integrity servers
Added warning for HP-UX low disk space availability
Added the ability to automatically install the PCIINFO Depot on older installations
Guided Update
Added ability to specify a baseline for deploying packages to the localhost
Baseline
Custom Baseline
Added dynamic filters for package selection based on the packages in the baseline
Added filter by server model
Added filter to create an HP CloudSystem Matrix custom baseline
Enhanced Add Baseline
Added ability to download a baseline from an HTTP server
Added the ability to abort downloading a baseline from hp.com or an HTTP server
Added localization support for Linux package configuration
Enhanced Delete Baseline to report which nodes are referencing the baseline to be deleted
Added Validate Baseline which verifies that all the files are present in the baseline
Interactive Command Line Interface (CLI)
Added the ability to download a baseline from hp.com or an HTTP server
New Hardware and Operating System Support
Support for new HP ProLiant Gen9 servers and options
Support for deploying firmware from Moonshot Component Pack to Moonshot systems
Support for Internet Explorer 11
Version:6.4.1.0 (27 Jun 2014)
Upgrade Requirement: Critical - HP requires users update to this version immediately. Note: HP SUM 6.4.1 has been patched to address SSL/TLS MITM Vulnerability CVE-2014-0224 http://www.openssl.org/news/secadv_20140605.txt.
The following are important fixes included in HP SUM 6.4.1:
Patched to address SSL/TLS MITM Vulnerability CVE-2014-0224 http://www.openssl.org/news/secadv_20140605.txt
Fixed dependency processing for Linux RPMs including proper handling of the hp-nx_nic-tools dependency for the HP QLogic nx-nic drivers
Legacy CLI mode
Fixed error handling with Virtual Connect firmware deployment
Fixed the situation when HP SUM would lose the location of the components which caused no updates to occur
See the HP SUM Release Notes for information about the issues resolved in this release.
Version:6.3.1.0 (17 Apr 2014)
Upgrade Requirement: Critical - HP requires users update to this version immediately. Note: HP SUM versions 6.3.0, 6.2.0, and 6.0.1 have been replaced with HP SUM version 6.3.1 because a potential security vulnerability CVE-2014-0160 has been found. HP SUM versions 6.3.0, 6.2.0, and 6.0.1 include an affected OpenSSL version with the vulnerability known as 'Heartbleed' that could be exploited remotely resulting in disclosure of information. For more information on this vulnerability, see the Customer Advisory.
The following are important fixes included in HP SUM 6.3.1:
Addressed potential security vulnerability CVE-2014-0160 (also known as “Heartbleed”)
Improved Report Content
Custom Baselines are created successfully on Linux systems
Improved user experience when deploying components using HP SUM via iLO Virtual Media
Offline mode hard disk drives firmware updates are being updated immediately
HP SUM discovers and updates hard disk drives connected behind any HP H22x Host Bus Adapter on HP ProLiant SL230s Gen8
HP SUM will now update the firmware on hard disk drives that are at different firmware versions and share a common firmware component
See the HP SUM Release Notes for information about the issues resolved in this release.
The following are enhancements for HP SUM 6.3.1:
Text-based console and scripting
To get more information, issue hpsum <console_command> [/help /h /?]
New Node types: iLO Federation – discovers the servers in an iLO Federation Trust group – Technology preview
Node groups
Sudo/SU credential support for HP-UX
Type:
Application - System Management
Version:
7.6.0(24 Oct 2016)
Operating System(s):
Microsoft Windows HPC Server 2008 R2
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Description
HP Smart Update Manager is a product which updates firmware and software on HPE Synergy Compute Modules, HPE ProLiant servers, and firmware on HPE Integrity and HPE ProLiant Moonshot servers. HP SUM has a browser-based GUI; as well as a scriptable interface using legacy command line interface, inputfile, and interactive command line interface modes. For more information, please see the Enterprise Information Library, http://www.hpe.com/info/sum-docs.
Enhancements
Enhancements for HP SUM 7.6.0:
Added support for new HPE Synergy Gen9 Compute Modules, HPE ProLiant Gen9 servers, and options
Added support for Microsoft Windows Server 2016
Baseline - Improved the custom baseline smart component filtering
Installation Instructions
Prerequisites:
For prerequisite information, please see the HP SUM Release Notes.
To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:
Reboot Requirement: Reboot may be required after installation for updates to take effect and hardware stability to be maintained.
Release Notes
End User License Agreements: HPE Software License Agreement v1 BSD License gSOAP Software End User License Agreement Libcurl End User License Agreement The MIT License Agreement OpenSSL License Agreement zlib End User License Agreement Hewlett-Packard End User License Agreement
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Important:
Note: To migrate node information from HP SUM 6.x to HP SUM 7.6.0, please run hpsum_migration.bat (Windows) or hpsum_migration.sh (Linux) found in the same directory as HP SUM. See the HP SUM Release Notes for more information. Note: To migrate node information from HP SUM 5.x to HP SUM 7.6.0, please run port-targets.bat (Windows) or port-targets.sh (Linux) found in the same directory as HP SUM. See the HP SUM Release Notes for more information. For more information on HP SUM, please see the Enterprise Information Library.
Fixes
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Important
Note: To migrate node information from HP SUM 6.x to HP SUM 7.6.0, please run hpsum_migration.bat (Windows) or hpsum_migration.sh (Linux) found in the same directory as HP SUM. See the HP SUM Release Notes for more information. Note: To migrate node information from HP SUM 5.x to HP SUM 7.6.0, please run port-targets.bat (Windows) or port-targets.sh (Linux) found in the same directory as HP SUM. See the HP SUM Release Notes for more information. For more information on HP SUM, please see the Enterprise Information Library.
Revision History
Version:8.4.5 (9 Sep 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Please see the SUM Release Notes for fixes addressed in this release.
Version:8.4.0 (2 Apr 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Please see the SUM Release Notes for fixes addressed in this release.
• Support for scheduling via iLO Repository. • Support for rollback and update of recovery sets. • Support for installing the necessary pre-requisites prior to inventory. • Handling dependencies for Mellanox components. • Provide detailed errors upon inventory and deploy failures. • Improved component dependency checking when doing updates via iLO Repository • Support online updates of HDDs behind Mesa Verde & NVMe controllers • Enhance the mechanism of handling reboot required flag in software RPM • Support for SLES 15 OS • Improved handling of SUM user sessions • Provide granular install status to SUM users via detailed XML • Prevent installation of post-production SPP on production servers.
Version:8.3.7 (28 Nov 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Added support for Microsoft Windows Server 2019 for HPE Gen10 servers
Version:8.3.6 (5 Nov 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Please note that this release of SUM is for OneView 4.10 and later addressing the following issues:
SUM self-update issue with multiple existing baselines resulting in component details not getting updated during baseline processing.
NVMe drive firmware version comparison failure.
This version of SUM is released for use in creating Custom Baseline bootable ISO files for use with OneView 4.10 and later.
Version:8.3.5 (9 Oct 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Please see the SUM Release Notes for fixes addressed in this release.
Support for Online updates of Gen10 ESXi nodes.
Version:8.3.1 (26 Jun 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Addressed increased DB size issue that is observed on adding multiple baselines.
Fixed an issue of not copying 'Saas_Required_Files.txt' file when a Custom Baseline is created using 'Save Baseline' option.
Addressed a OneView hang issue.
Addressed file tag missing issue in Custom Baseline meta xml file.
Version:8.3.0 (26 Jun 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Please refer to the SUM Release Notes for information on the issues addressed in this release.
Version:8.2.0 (5 Feb 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Security Enhancements:
Improved security key management for encrypting and decrypting node credentials.
Better session token management.
Enabled SUM with FIPS compliant Open SSL libraries which enables SUM to update systems where FIPS is enabled on OS.
Custom Baseline Enhancements:
Reduce the size of SPP ISO by selecting only the latest component version.
Display only the list of server model filters on Custom baseline UI that is supported by SPP.
Enable staging the applicable components to iLO Repository. Customer can now update systems in two steps.
Upload the components before the maintenance window and
Perform the actual deploy during the maintenance window.
Enable updating firmware on NVDIMM devices.
Support for updating software components on Gen 9 ESXi.
Better handling dependency between IE and ME
Version:8.1.0 (22 Dec 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Support for iLO High Security Mode
Version:8.0.0 (12 Jul 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Version:7.6.2 (15 Sep 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
HPSUM now properly detects which one of CISS2 and CISS3 driver is installed and show up only the applicable one.
Added support for Firmware RPM debranded components
Added support for component configuration in case of debranded components
Version:7.6.0 (24 Oct 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.6.0:
Added support for new HPE Synergy Gen9 Compute Modules, HPE ProLiant Gen9 servers, and options
Added support for Microsoft Windows Server 2016
Baseline - Improved the custom baseline smart component filtering
Version:7.5.1 (1 Apr 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.5.1:
Added support for new HP ProLiant Gen9 servers and options
Added support for HP 512MB Flash Backed Write Cache for B-Series Smart Array
Added support for Red Hat Enterprise Linux 7.2, SUSE Linux Enterprise Server 12.1
Updated logo and copyright to Hewlett Packard Enterprise
Improved Trusted Module (TM) and Trusted Platform Module (TPM) support
Baseline - Improved the custom baseline smart component filtering
Version:7.4.0 (1 Oct 2015)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.4.0:
Added support for new HP ProLiant Gen9 servers and options
Node Deployment
Node Deployment user interface has been modified to have Easy and Advanced modes as well as a component dashboard. With both modes, HP SUM will still present the components that can be installed on the node. Easy mode allows you to deploy the HP SUM recommended components in a single step. Advanced mode allows you to individually select which components to deploy.
Node deployment can now scale to 50 nodes.
Baseline
Download baseline from hp.com now requires an entitlement token in order to download entitled components delivered with the HP Service Pack for ProLiant.
Support for Red Hat Enterprise Linux 6.7, SUSE Linux Enterprise Server 11.4, VMware vSphere 6.0 U1
Version:7.3.1 (25 Sep 2015)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience. Pci modem driver.
See the HP SUM Release Notes for information about the issues resolved in this release.
Version:7.3.0 (3 Aug 2015)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.3.0:
Added support for new HP ProLiant Gen9 servers and options
Added deployment support for VMware firmware components that have been converted from scexe to zip format
Added support when HP SUM is running on a supported Linux operating system to accept SSH keys as passwords
Custom Baseline - Added ability to specify an explicit version of HP SUM to be included in the baseline
Version:7.2.0 (30 Mar 2015)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.2.0:
Baseline
New interface for component configuration including the ability to import and export the component configuration data (Available in GUI, CLI, and interactive CLI modes)
Added modifications to Custom Baseline to generate baselines which can be used by HP Version Control Repository Manager (VCRM)
Deployment
Modified the node deployment-related screens to remove the Analysis button
Node Groups
Removed the default Node Group
Reports
Specify the location where reports are stored (Available in GUI, CLI, and interactive CLI modes)
New Hardware and Operating System Support
Support for new HP ProLiant Gen9 servers and options
Support for Red Hat Enterprise Linux 7.1, Red Hat Enterprise Linux 6.6, SUSE Linux Enterprise Server 12, VMware vSphere 5.1 U3, and VMware vSphere 2015
Version:7.1.0 (9 Sep 2014)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
See the HP SUM Release Notes for information about the issues resolved in this release.
Enhancements for HP SUM 7.1.0:
Scalable Updates powered by iLO Federation
Added the ability to automatically discover the iLO Federation Groups on the management network using multicast technology as well as adding them manually
Added the ability to update online the iLO and ROM firmware on HP ProLiant servers in the iLO Federation Group via the iLO
Added the ability to update all applicable firmware on HP ProLiant servers in the iLO Federation Group via the iLO using offline firmware deployment
Deployment of VMware VIBs and Linux firmware RPMs
Deployment
Enhanced deployment experience by viewing deployment logs during the deployment process (AKA Live logs)
Enhanced hard disk drive firmware deployment for selective HDD update (limited to firmware packages that supports this)
Added warning when deploying to nodes with HP Service Guard for HP-UX or Linux
HP Integrity servers
Added warning for HP-UX low disk space availability
Added the ability to automatically install the PCIINFO Depot on older installations
Guided Update
Added ability to specify a baseline for deploying packages to the localhost
Baseline
Custom Baseline
Added dynamic filters for package selection based on the packages in the baseline
Added filter by server model
Added filter to create an HP CloudSystem Matrix custom baseline
Enhanced Add Baseline
Added ability to download a baseline from an HTTP server
Added the ability to abort downloading a baseline from hp.com or an HTTP server
Added localization support for Linux package configuration
Enhanced Delete Baseline to report which nodes are referencing the baseline to be deleted
Added Validate Baseline which verifies that all the files are present in the baseline
Interactive Command Line Interface (CLI)
Added the ability to download a baseline from hp.com or an HTTP server
New Hardware and Operating System Support
Support for new HP ProLiant Gen9 servers and options
Support for deploying firmware from Moonshot Component Pack to Moonshot systems
Support for Internet Explorer 11
Version:6.4.1.0 (27 Jun 2014)
Upgrade Requirement: Critical - HP requires users update to this version immediately. Note: HP SUM 6.4.1 has been patched to address SSL/TLS MITM Vulnerability CVE-2014-0224 http://www.openssl.org/news/secadv_20140605.txt.
The following are important fixes included in HP SUM 6.4.1:
Patched to address SSL/TLS MITM Vulnerability CVE-2014-0224 http://www.openssl.org/news/secadv_20140605.txt
Fixed dependency processing for Linux RPMs including proper handling of the hp-nx_nic-tools dependency for the HP QLogic nx-nic drivers
Legacy CLI mode
Fixed error handling with Virtual Connect firmware deployment
Fixed the situation when HP SUM would lose the location of the components which caused no updates to occur
See the HP SUM Release Notes for information about the issues resolved in this release.
Version:6.3.1.0 (17 Apr 2014)
Upgrade Requirement: Critical - HP requires users update to this version immediately. Note: HP SUM versions 6.3.0, 6.2.0, and 6.0.1 have been replaced with HP SUM version 6.3.1 because a potential security vulnerability CVE-2014-0160 has been found. HP SUM versions 6.3.0, 6.2.0, and 6.0.1 include an affected OpenSSL version with the vulnerability known as 'Heartbleed' that could be exploited remotely resulting in disclosure of information. For more information on this vulnerability, see the Customer Advisory.
The following are important fixes included in HP SUM 6.3.1:
Addressed potential security vulnerability CVE-2014-0160 (also known as “Heartbleed”)
Improved Report Content
Custom Baselines are created successfully on Linux systems
Improved user experience when deploying components using HP SUM via iLO Virtual Media
Offline mode hard disk drives firmware updates are being updated immediately
HP SUM discovers and updates hard disk drives connected behind any HP H22x Host Bus Adapter on HP ProLiant SL230s Gen8
HP SUM will now update the firmware on hard disk drives that are at different firmware versions and share a common firmware component
See the HP SUM Release Notes for information about the issues resolved in this release.
The following are enhancements for HP SUM 6.3.1:
Text-based console and scripting
To get more information, issue hpsum <console_command> [/help /h /?]
New Node types: iLO Federation – discovers the servers in an iLO Federation Trust group – Technology preview
Node groups
Sudo/SU credential support for HP-UX
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.
Click the green bars to expand and view more options.
Clear All
Loading..
Products & Solutions
Loading..
No selections available
No selections available
Mission Critical x86 Servers
Integrity/HP-UX Servers
Gen10
Gen9
Gen10
Gen9
Hp Smart Update Manager Hung
Loading.. / Loading.. / Loading..
No content available for the current selections
Modifying any selections above will clear your search results.
Search looks in the selected product or solution
Search results are for matches in document titles and associated product or solution names
Search is not case sensitive
Use quotes to search for phrases. Ex: 'operating system'
Use spaces to separate search terms and phrases (not commas)
You can combine single terms and phrases. Ex: 'operating system' windows
Quick Links
Categories
Use the category numbers below when making entries into the spreadsheet
Multiple categories are allowed. Separate each category with a comma
Category #
Category Name
Subcategories
Use the subcategory values in the left column when making entries into the spreadsheet
Multiple subcategories are allowed. Seperate subcategory values with a comma
For entries that need to be visible at all times (no matter what subcategory you are on) just enter 'all' into the subcategory column
Task (Content Type)
Hp Smart Update Manager Windows
Use the task numbers below when making entries into the spreadsheet.
Only one task is allowed per entry
Task #
Task Name
Languages
Hp Smart Update Manager
Use the language numbers below when making entries into the spreadsheet
Only one language is allowed per entry
Language #
Language Name
File Types
Hp Smart Update Manager Baseline
Use the file type numbers below when making entries into the spreadsheet
Only one file type is allowed per entry
File Type #
File Type
1
PDF
2
HTML
12
Zip
13
CHM
3
DOC
4
PPT
5
XLS
6
Video
9
JPG
10
GIF
11
MP3
Configuration (0)
Type
Size
Date
Getting Started (0)
Type
Size
Date
Installation (0)
Type
Size
Date
Quick Reference Mobile Experience (0)
Type
Size
Date
Reference (0)
Type
Size
Date
Related Links (0)
Type
Size
Date
Free Hp Smart Update Manager Iso Programs For Windows
Release Notes (0)
Type
Size
Date
Safety & Regulatory (0)
Type
Size
Date
Free Hp Smart Update Manager Iso Programs Free
Service & Maintenance (0)
Type
Size
Date
User Guides (0)
Type
Size
Date
Videos (0)
Type
Size
Date
Free Hp Smart Update Manager Iso Programs Download